Audi A3 How to Install Lowering Springs | Audiworld Step 1 – Jack Up Your A3Step 2 – Pull Wheel and Disconnect Sway BarStep 3 – Disconnect Steering KnuckleStep 4 – Loosen The Inner AxleStep 5 – Remove Ball JointStep 6 – Remove Strut AssemblyStep 7 – Disassemble The StrutStep 8 – Assemble Your Lowering Spring AssemblyStep 9 – ReinstallStep 10 – Replace The Rear SpringsRelated Discussions and SiteYou can jack the front and then the rear, or vice versa, or you can get all four off the ground at one time if you have four jack stands available. If can get all four up at once, that is probably going to make it easier for you. Be sure to crack your lugs loose before lifting, so you don't have to wrench hard on the wheels when they are up in the air. (If your vehicle has the caps covering the lugs, find your cap removal tool and pop the caps off the lugs first before trying to break the lug..See more on audiworld 2011 Audi A3 Performance Lowering Kits - CARiD Audi A3 Quattro Typ 8P 2011, Rear Performance Air Suspension Lowering Kit with 5.4" Rear Body Drop by Air Lift®. These are complete air suspension kits that allow over 4 inches of drop in ride height when aggressive looks and handling..