AC WIRING COLORS BLACK WHITE GREEN
Which color is for what in electric wiring? green, black
Apr 23, 2007The black is your power, and white is neutral. The screw heads on the plug will have a green painted one for the ground, a silver colored one for white, and the brass or copper colored one is for the black wire. Note: above is for 120volts only. For 240volts black and white Followers: 1Status: Openwhite is positive..k is negitave....n is ground......Best answer · 2Electrical Wiring Colors0Ac Wiring Colors0Black = Load Line
White = Neutral Line
Green = Earth Bonded / Grounded Line.
Think of the black line as an artery, bringing fresh electric..12For the best answers, search on this site https://shorturl/awWOO
Look at the spots where the wires go. You are right about the green, of cours..0Green (ground)
Note: above is for 120volts only.
For 240volts black and white are hot leads.2Good answers so far. One thing to watch out for is polarization. If the male and female plugs have one slot (or prong) that is wider than the other..0Joe is right , plus a two way switch needs a traveler usually red .0Black is "Hot", white is "neutral, and Green or bare copper is ground.3depends on what your wiring. In home switches it's usually, White hot, black negitive, Green ground. but any combo is used for different applicatio..0
Wiring Color Codes | Color Codes | Electronics Textbook
Chapter 2 - Color Codes. See Table below. The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active. Three-phase lines are red, black, and blue. Canada AC power circuit wiring color codes.