MANUAL FEED PROMPT
Manual Feed Tray prompting after migrating printer to new
Manual Feed Tray prompting after migrating printer to new server 04-20-2017 10:30 AM I'm not quite sure (as your picture is somewhat blurred) but it appears that you have configured all of the cassette trays, and the envelope feeder, with the blanket " Any Size ", " Any Type " settings.I have been reading about this off and on, and I still can't find anything that I haven't already tried. I performed a Factory Reset on the Printer thinking that maybe it was related to a printer setting. . . Still not change.0>> to Manually Load Tray 1, or press OK Is this the exact message? I'd have expected it to include reference to a paper size and paper type . If so, what are those values? Do these attributes correspond to what the printer thinks is in the envelope feeder? I don't have access to a LJ M604 printer, and none of my printers have an Envelope Feeder accessory, so I don't know what settings (in terms of size and type) are available for this input source. For comparison, this is the Paper Setup page on the Embedded Web Server of a LJ M475dn : and this is the equivalent Manage Trays dialogue on a PageWide x556h printer:0When I try and print an envelope it displays Manually feed: Tray 1 on the screen, then cycles to Manually fee: Plain, Env#10. I have not made any changes to the printer during this process since it worked with the old server. Here are the settings in the printer for the Trays and Paper.0I'm not quite sure (as your picture is somewhat blurred) but it appears that you have configured all of the cassette trays, and the envelope feeder, with the blanket " Any Size ", " Any Type " settings. Perhaps you should try configuring each of the trays to represent what they actually contain. In particular (given the prompt you receive) configure the envelope feeder to contain paper size = Envelope #10 and paper type = Plain .0If you open the attached image in a new tab it opens full screen, and isn't blurry. All of the trays are currently set as default, but I have tried setting the Envelop Feeder and Tray 1 for Envelope #10, Tray 2 as Letter, and I got the same response. I even tried using Tray 1/Maual Feed with Envelopes and I get the same response. I have tried multiple settings in the driver as well with no change. I need to start noting what I change so I don't get carried away with things.0>> If you open the attached image in a new tab it opens full screen, and isn't blurry I tried that and it was still blurry. But i've just tried it again, and it's now clear! >> All of the trays are currently set as default, but I have tried setting the Envelop Feeder and Tray 1 for Envelope #10, Tray 2 as Letter, and I got the same response I'd start by setting unique (but representative) size and type attributes for each of the paper sources; for example: Envelope feeder : size = Envelope #10 and type = Plain to match what it appears (from your prompt) the print job is requesting. Tray 1 (the drop-own tray): size = Any and type = Any , although it might be worth (temporarily) setting something like size = A5 (or soime other size you will not be using). Tray 2 : the size (other than Any ) should be detected automatically via the paper size sensors in the tray) - set it to the loaded paper size (e.g. A4 or Letter ); set the type to Plain (or perhaps Letterhead if it is preprinted media). Of course, it's possible that the appliction and/or printer driver settings on your workstation is (for some as yet unknown reason) explicitly requesting "manual feed", or selecting the paper source explicitly (rather than, or in addition to, using size and type attributes). To check exactly what paper source is being selected, you'd need to 'capture' a small sample print job. On a Windows 10 system, you'd do this by selecting the ' print to file ' option in the Print dialogue (although i'm unsure just what complications the "server" element might introduce). Then 'analyse' the content of the resultant file to see just what the printer is being asked to do. The PRN File Analyse tool in the PCL Paraphernalia application, available via http://wwwaraphernalia can assist with this analysis.0I set each tray up like suggested, and I received the same result. If I have time today I'm thinking of installing the printer locally on their computer, and seeing if I get the same result. At least that way I can take the server out of the equation.0I finally had some time today, so I revisited this issue. For the life of me I can not figure out what the deal is. I have one on a print server running Server 2008, with the HP Universal Printer PCL 6 driver. It works, with no issues. I have one on a print server running Server 2016, with the HP Universal Printer PCL 6 driver as well as the HP Laserjet M604 PCL 6 printer driver, and neither will work. I have installed the printer locally with both the HP Universal Printer PCL6 and HP Laserjet M604 drivers, and it will not print either. I'm assuming it has to be a setting in the printer driver at this point, so I matched the settings from the 2008 server to the local installation, and it still does not work. I'm getting the error to load tray one on the printer, and on the computer I get a pop up that says the printer is out of paper.0Until we know just what selection attributes (in terms of paper size , type & source ) the driver is including in the print job, I don't think that I can offer any more relevant advice. If we knew for certain what those attributes are, we may (but, of course, may not) be able to work backwards from there to work out what may be happening. I explained how you might be able to get this information in a previous response: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To check exactly what paper source is being selected, you'd need to 'capture' a small sample print job. On a Windows 10 system, you'd do this by selecting the ' print to file ' option in the Print dialogue (although i'm unsure just what complications the "server" element might introduce). Then 'analyse' the content of the resultant file to see just what the printer is being asked to do. The PRN File Analyse tool in the PCL Paraphernalia application, available via http://wwwaraphernalia can assist with this analysis. <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<0
Solved: LaserJet 600 M602 always defaults to manual feed
LaserJet 600 M602 always defaults to manual feed All print jobs prompt to feed paper in Tray 1 unless Manual Feed is disabled via the web interface for the printer. Tray sizes cannot be set using the web interface. Tray 1 is set (automatically) to Any Size, Any Type. LaserJet 600 M602 always defaults to manual feedManual feed should be disabled by default under print settings. Disabling it doesnt mean you cant use the tray, it just wont prompt you to load it with paper on every print job.Best answer · 1I doesn't solve the problem.. Same problem on M680!! Who is the genius at HP who has decided to set the manual feed as the default tray (tray 1)?3My issue was with the media source mapping. Once I changed the setting from standard to classic, it fixed my problem. MEDIA SOURCE MAPPING: Select and maintain trays by number when you are not using the printer driver or when the software program has no option for tray selection. CLASSIC : Tray numbering is based on HP LaserJet 4 and older models. STANDARD : Tray numbering is based on newer HP LaserJet models. Directions for how to change the setting on a LaserJet 600 M602 On the physical printer press the home button. Go to Administration. Click OK Go to General Print Settings. Click OK Go to PCL. Click OK. Go to Media Source Mapping. Click OK. Set to Classic. Click OK. There was nothing on the web anywhere that mentioned this as a possible fix. Hope this is helpful to others.0The printer does not have manual feed enabled, yet it still prompts to manually feed tray one when the document should go to tray 2. Very frustrating.0What is the exact message it gives you when it comes to feed from Tray 1?
If my post resolves your issue please click the accepted as solution button under it. To thank a Tech for a post click the thumbs up button under the post. You can even click both buttons. . .0You have to go to the printer and respond to the message on the LED panel to load paper for Tray 1 and tell it to use Tray 2.0I don't think that's the exact message it usually says something like load plain letter Tray 1. And the exact wording will give us a clue as to how tray two might be set incorrectly which is why it's asking for paper from Tray 1.
If my post resolves your issue please click the accepted as solution button under it. To thank a Tech for a post click the thumbs up button under the post. You can even click both buttons. . .0The other thing you can do is open and then close tray 2 and it should ask you something about do you want to modify paper type and size and hit OK the size should be a letter and the type should be plain or any. In addition to being certified on this machine there are three of them in the office where I work every day and I do not have any issues like the ones being reported.
If my post resolves your issue please click the accepted as solution button under it. To thank a Tech for a post click the thumbs up button under the post. You can even click both buttons. . .0The issue does not appear to be how the trays are set. We believe it maybe due to settings in the document which was created in Office 1997 or 2000 as it is a doc file. It only happens on this older document.0
Printer always asks to manually feed paper when printing
Printer always asks to manually feed paper when printing (HP Color Laserjet 3525) There are two trays, Tray 1 has legal sized paper and Tray 2 has letter size. Both trays are full, and they are both configured on the printer as having the corresponding paper type.Reviews: 7
"Waiting on manual feed tray" Message with HP Universal
Sep 14, 2009"Waiting on manual feed tray" Message with HP Universal Printer Driver. Sep 14, 2009, 8:26 AM -05:00. I am doing an SBS 2008 install at a customer and have run into the whole x86 / x64 print driver problem. The SBS box is x64 and that is where I wanted to install the network printers. The terminal server is x86.
Disable Manual Feed Prompt - YouTube
Click to view on Bing0:28Dec 14, 2016Changing the paper settings and adjust fusing modes on the HP LaserJet M601/602/603 - Duration: 4:57. Ecological Toner & Service 11,773 viewsAuthor: Jeffrey LewisViews: 3
Manual Feed Prompt - disenodelogos
will prompt you for an access code use the arrow keys to change the current digit and press the definition of feed give food to supply with material or power cause to pass gradually and steadily typically through a confined space You may looking Manual Feed Prompt document throught internet in google, bing, yahoo and other mayor seach engine.
Laserjet 4250 - prompting for manual feed tray
May 17, 2010Laserjet 4250 - prompting for manual feed tray This is far and away the most idiosyncratic printer I've ever encountered. Its latest quirk is that it prompts users to "Manually Feed Extra Heavy Letter" when some (but not all) users print to it.
HP LaserJet 4200 shows "Manual Feed Tray 1 - Super User
HP LaserJet 4200 shows “Manual Feed Tray 1” when printing from Word. Ask Question 2. I have an HP LaserJet 4200 printer that is acting really weird. I can print from internet just fine, no problem.. but when I try to print from a document used in Microsoft Word, for example, I always get: How to compare two different files line by line[PDF]
How To Disable Manual Paper-tray Confirmation
How To Disable Manual Paper-tray Changed settings to Disable Tray 1. 2. Changed Manually Feed Prompt to "Unless Loaded" Make sure the paper size tabs are in the right place in your tray. Load the paper input tray. Print the first or last page on different paper (Windows). Manual color options. Send a
Message: "Load MP Feeder" - Lexmark Support
The printer should fire up and try to print from that tray. (For more information on loading paper into the multipurpose feeder, click here.) If you continue to receive the Load MP feeder message, you may have a bad sensor or a loose sensor flag. Do the following: Look at the MP Feeder