USB 3 0 HUB SCHEMATIC
Amazon: USB Splitter Cable, USB Female to 2 Male Splitter,
Use Schematic: Features: 1. Works with USB 3.0, 2.0, or 1.1 host controllers and devices on Windows, Mac, and Linux/Unix computers at USB 2.0 speeds. On the female end, I plugged in a multi-USB hub that had my keyboard and mouse plugged in, and the two male ends went into two separate laptops sitting side-by-side. This worked
Amazon: Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller
Aug 08, 2018LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system. Works the same as original Nano, runs perfectly on programming software. Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
RJ11 vs RJ45 - Difference and Comparison | Diffen
As shown in the schematic above, RJ45 uses an 8P8C configuration, which means 8 Positions and 8 Contacts (or connectors, or conductors). Using 8 contacts allows for greater bandwidth so RJ45 is used for data-intensive applications like Ethernet and can support bandwidth up to 10Gbps. Overall bandwidth is, of course, contingent upon what other components of the
Arduino Tutorial: Using Potentiometer Control LED Light
Supporting USB data cable. In the experiment, connect pin 1 and pin 3 to the 5V GND of the development board, and then read the voltage of pin 2 obtained by the potentiometer through the analog input pin A0, and the range is between 0V to 5V. Experimental Steps. 1) Build the circuit according to the schematic diagram.
Stamp-C3 contains 5V->3 DC/DC design, GPIOx13, programmable RGB LED x1, Reset button x1, button x1, 3D antenna,providing stable and reliable wireless communication. LOW-CODE DEVELOPMENT: Stamp-C3 fully compatible with Arduino, ESP32-IDF, and other mainstream development platforms to quickly build various applications. (UIFlow support
How to communicate two HC12 Module with Arduino
LiquidCrystal_I2C lcd (0x27,2,1,0,4,5,6,7,3,POSITIVE); Creates the LCD object with the address and pinout and black light. In the void setup function, pins 2 and 3 are configured as inputs, configure the serial communication speed of the USB, and of the serial communication with the HC12 module and initiates communication with the LCD display.
TPS2553 data sheet, product information and support | TI
Schematic: PDF. Reference designs. TIDA-00287 — 2-Port USB 3.0 hub reference design. This verified reference design is a two-port, USB 3.0 compliant hub. It provides simultaneous SuperSpeed and high-speed/full-speed connections on the upstream port and provides SuperSpeed, high-speed, full-speed, or low-speed connections on the downstream
Support : Aeotec Help Desk
Oct 23, 2016Door / Window Sensor (DSB04100) 0. Door / Window Sensor 6 5. Door Window Sensor 6 user guide. Door Window Sensor 6 technical specifications. Using Garage Door Controller with SmartThings Hub's Custom Device Type. View all 10. LED Bulb 6 6. Micro Switch G2 / Micro Smart Switch G2 3.
ESP32-S3-Korvo-1 v5.0 - GitHub
5.2 Schematic; 5.3 PCB Layout; 5.4 Dimensions; This user guide will help you get started with ESP32-S3-Korvo-1 v5.0 and will also provide more in-depth information. Notice. If you use ESP32-S3-Korvo-1 v4.0, please follow this guide. The differences between v5.0 and v4.0 are described in Section Hardware Revision Details. The ESP32-S3-Korvo-1 is
GitHub - Xinyuan-LilyGO/T-PicoC3
Apr 13, 2022Go to Tools->Boards->Board Manager in the IDE; Type "pico" in the search box and select "Add": Copy TFT_eSPI to the <C:\Users\Your User Name\Documents\Arduino\libraries> directory; Open Arduino IDE, find TFT_eSPI in the file and example, the T-Display factory test program is located at TFT_eSPI -> FactoryTest, you can