WIRE HARNESS RETENTION DEVICES
ROUTING AND RETENTION AIDS - PKC Group
cost-effective wiring systems, components, and electronics for the commercial vehicle, automotive, agricultural, construction, recreational, energy, and industrial electronics industries. Wiring Systems: From a single wire harness to an entire Electrical Distribution System (EDS), PKC delivers power where and when you need it.
Design and Manufacturing Standard for Electrical Harnesses
4.2.1 Coaxial cable- The minimum bend radius for coaxial radio frequency cable or harness assemblies containing such cable shall not be less than six times the OD of the cable or harness. 4.2.2 Wire size larger than 10- The minimum bend radius for harness assemblies containing wire larger than size 10 shall not be less than six times the OD of the harness.[PDF]
Wiring Code Identification Information
H. Wire harnesses should not be routed closer than one inch (25 mm) from high voltage devices such as the distributor coil or spark plug wires. I. When underbody routing is unavoidable, provide a special wire jacket or covering, such as polyurethane, fiberglass sleeve or loom, for protection. J. Wire harnesses included with modular